How should the used tiles be packaged for shipment to Armstrong?

1. Material must be clean, dry and in the acceptable category above. 2. No wood, metal or construction debris of any kind can be included. If C&D waste is included with ceilings, possible charges can be incurred for disposal. 3. Stack tiles on 4'x4' shipping pallets. Stack used tile 4' or 6' tall on the pallets. Secure tiles on pallets with stretch wrap or metal bands. You will need a pallet jack and possibly a forklift (depending on dock) to maneuver the loaded pallets. Trailer capacity should be maximized. (2'x4' pallets may be used if elevator space is limited.) 4. All tiles should be straight on pallets and secured within the trailer so that there is no risk of loads falling during transit or when pallets are unloaded. Material must be wrapped tightly and packaged so that pallets remain stable.

4 ft. x 4 ft. pallet 4 ft. x 6 ft. pallet Vertically stacked two (2) 4 ft. high pallets to maximize trailer loads. Vertically stacked 6 ft. high pallets to maximize trailer loads.

Many crews speed up the stacking by building a simple two-sided, free-standing frame. Note: Frame is not attached to pallet.